Difference between revisions of "Pinouts Berzerk Pinout"
(Created page with "This game is made up of a whopping 5 PCBS ZPU-1000: Main CPU board>br> BSC-1000: Colour overlay pcb<br> VFB-1000: Video Board<br> SB-1000: Sound FX<br> VSU-1000: Voice Genera...") |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
=== ZPU-1000 === | === ZPU-1000 === | ||
Marked from right to left 1-10 | Marked from right to left 1-10<br> | ||
1 - book keeping | 1 - book keeping<br> | ||
2 - Ground | 2 - Ground<br> | ||
5 - +5 | 5 - +5<br> | ||
9 - +5 | 9 - +5<br> | ||
Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms | Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms<br> | ||
=== BSC-1000 === | === BSC-1000 === | ||
2 - +5 | 2 - +5<br> | ||
4 - Blue | 4 - Blue<br> | ||
5 - Green | 5 - Green<br> | ||
6 - Red | 6 - Red<br> | ||
=== VFB-1000 === | === VFB-1000 === | ||
'''J8 - 12 pins'''<br> | '''J8 - 12 pins'''<br> | ||
1 - Ground | 1 - Ground<br> | ||
3 - Comp sync | 3 - Comp sync<br> | ||
7 - +5 | 7 - +5<br> | ||
8 - +5 | 8 - +5<br> | ||
9 - Ground | 9 - Ground<br> | ||
11 - Ground (normally -5 for 4027 rams, not needed for 4164 but I ground so its possible to also use 41256) | 11 - Ground (normally -5 for 4027 rams, not needed for 4164 but I ground so its possible to also use 41256)<br> | ||
12 - +5 (normally +12 for 4064) | 12 - +5 (normally +12 for 4064)<br> | ||
'''J5 - 10 pins'''<br> | '''J5 - 10 pins'''<br> | ||
1- Ground | 1- Ground<br> | ||
6- Fire | 6- Fire<br> | ||
7- Down | 7- Down<br> | ||
8- Up | 8- Up<br> | ||
9- Right | 9- Right<br> | ||
10- Left | 10- Left<br> | ||
'''J6 - 10 pins'''<br> | '''J6 - 10 pins'''<br> | ||
1- Ground | 1- Ground<br> | ||
2- Coin 1 | 2- Coin 1<br> | ||
3- Coin 2 | 3- Coin 2<br> | ||
4- Coin 3 | 4- Coin 3<br> | ||
9- P2 Start | 9- P2 Start<br> | ||
10- P1 Start | 10- P1 Start<br> | ||
=== SB-1000 === | |||
'''J3 Pinout'''<br> | |||
3 - Audio in. Goes to the VSU pin 6, sound input for voice board<br> | |||
4 - +5<br> | |||
6 - volume control (connected to 50k pot)<br> | |||
7 - +12<br> | |||
8 - volume control (connected to 50k pot)<br> | |||
9 - Speaker -<br> | |||
11 - Speaker +<br> | |||
12 - +12<br> | |||
=== VSU-1000 === | |||
1- -5(says -12 but -5 works fine)<br> | |||
5- +5<br> | |||
6- Audio out. Connect to pin 3 of the SB 1000<br> | |||
<br> | |||
<br> | |||
Latest revision as of 08:38, 16 August 2012
This game is made up of a whopping 5 PCBS
ZPU-1000: Main CPU board>br>
BSC-1000: Colour overlay pcb
VFB-1000: Video Board
SB-1000: Sound FX
VSU-1000: Voice Generator Board
ZPU-1000
Marked from right to left 1-10
1 - book keeping
2 - Ground
5 - +5
9 - +5
Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms
BSC-1000
2 - +5
4 - Blue
5 - Green
6 - Red
VFB-1000
J8 - 12 pins
1 - Ground
3 - Comp sync
7 - +5
8 - +5
9 - Ground
11 - Ground (normally -5 for 4027 rams, not needed for 4164 but I ground so its possible to also use 41256)
12 - +5 (normally +12 for 4064)
J5 - 10 pins
1- Ground
6- Fire
7- Down
8- Up
9- Right
10- Left
J6 - 10 pins
1- Ground
2- Coin 1
3- Coin 2
4- Coin 3
9- P2 Start
10- P1 Start
SB-1000
J3 Pinout
3 - Audio in. Goes to the VSU pin 6, sound input for voice board
4 - +5
6 - volume control (connected to 50k pot)
7 - +12
8 - volume control (connected to 50k pot)
9 - Speaker -
11 - Speaker +
12 - +12
VSU-1000
1- -5(says -12 but -5 works fine)
5- +5
6- Audio out. Connect to pin 3 of the SB 1000
