Difference between revisions of "Pinouts Berzerk Pinout"
m |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
VSU-1000: Voice Generator Board<br> | VSU-1000: Voice Generator Board<br> | ||
=== ZPU-1000 === | === ZPU-1000 === | ||
Marked from right to left 1-10<br> | Marked from right to left 1-10<br> | ||
1 - book keeping<br> | 1 - book keeping<br> | ||
| Line 15: | Line 15: | ||
Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms<br> | Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms<br> | ||
=== BSC-1000 === | === BSC-1000 === | ||
2 - +5<br> | 2 - +5<br> | ||
4 - Blue<br> | 4 - Blue<br> | ||
| Line 21: | Line 21: | ||
6 - Red<br> | 6 - Red<br> | ||
=== VFB-1000 === | === VFB-1000 === | ||
'''J8 - 12 pins'''<br> | '''J8 - 12 pins'''<br> | ||
1 - Ground<br> | 1 - Ground<br> | ||
| Line 46: | Line 46: | ||
9- P2 Start<br> | 9- P2 Start<br> | ||
10- P1 Start<br> | 10- P1 Start<br> | ||
=== SB-1000 === | |||
'''J3 Pinout'''<br> | |||
3 - Audio in. Goes to the VSU pin 6, sound input for voice board<br> | |||
4 - +5<br> | |||
6 - volume control (connected to 50k pot)<br> | |||
7 - +12<br> | |||
8 - volume control (connected to 50k pot)<br> | |||
9 - Speaker -<br> | |||
11 - Speaker +<br> | |||
12 - +12<br> | |||
=== VSU-1000 === | |||
1- -5(says -12 but -5 works fine)<br> | |||
5- +5<br> | |||
6- Audio out. Connect to pin 3 of the SB 1000<br> | |||
<br> | |||
<br> | |||
Latest revision as of 08:38, 16 August 2012
This game is made up of a whopping 5 PCBS
ZPU-1000: Main CPU board>br>
BSC-1000: Colour overlay pcb
VFB-1000: Video Board
SB-1000: Sound FX
VSU-1000: Voice Generator Board
ZPU-1000
Marked from right to left 1-10
1 - book keeping
2 - Ground
5 - +5
9 - +5
Rest are not used, there is pins there for -5 and +12 but are not needed unless you use some queerbo roms
BSC-1000
2 - +5
4 - Blue
5 - Green
6 - Red
VFB-1000
J8 - 12 pins
1 - Ground
3 - Comp sync
7 - +5
8 - +5
9 - Ground
11 - Ground (normally -5 for 4027 rams, not needed for 4164 but I ground so its possible to also use 41256)
12 - +5 (normally +12 for 4064)
J5 - 10 pins
1- Ground
6- Fire
7- Down
8- Up
9- Right
10- Left
J6 - 10 pins
1- Ground
2- Coin 1
3- Coin 2
4- Coin 3
9- P2 Start
10- P1 Start
SB-1000
J3 Pinout
3 - Audio in. Goes to the VSU pin 6, sound input for voice board
4 - +5
6 - volume control (connected to 50k pot)
7 - +12
8 - volume control (connected to 50k pot)
9 - Speaker -
11 - Speaker +
12 - +12
VSU-1000
1- -5(says -12 but -5 works fine)
5- +5
6- Audio out. Connect to pin 3 of the SB 1000
