Difference between revisions of "PCB Repair Logs Missle Command"
m |
m |
||
| Line 34: | Line 34: | ||
<br> | <br> | ||
'''Repairer:''' [http://www.aussiearcade.com.au/member.php/133-GameDude GameDude]<br> | |||
'''Forum Thread:''' [http://www.aussiearcade.com.au/showthread.php/10302-Missile-Command-Atari Missile Command PCB Repair]<br> | |||
<br> | |||
[[PCB_Repair_Index|Back to PCB Repair Index]] | [[PCB_Repair_Index|Back to PCB Repair Index]] | ||
Revision as of 11:56, 15 August 2012
Missile Command
 |
|
| PCB Image | reserved |
|---|---|
| Pin Out | Reserved |
Repairer: Prof
Forum Thread: Missile Command PCB Repair
OK, won a Missile Command off ebay, description said parts pcb, but anyway.
OK Recieved the pcb, quick look, missing the crystal 3 eproms 2 eprom sockets and the cpu.
Burnt 3 new roms and installed 2 sockets, put a good cpu and crystal in, changed all the 4116 rams (I bought a few nos off ebay) Fired it up, yellow screen.
OK, time to have a better look, ended up straighting all the pins on the back of the pcb that where touching, tried again, now a white screen and reseting, better.
Try the test mode, goes into it, give a rom 2 error sometimes. Verfy the rom, nothing, resolder the socket, nothing.
Check the rom addressing ciruit, found a bad 74ls42 at N2 and a bad 74ls153 at F3. Changed with new chips, voila, working Missile Command But, seems to have the yello background missing, odd, will get the schematics and have a look.
Okay, found the problem with the missing yellow mountains, bad 7474 at A7, replaced with a good one and now running 100%
Repairer: GameDude
Forum Thread: Missile Command PCB Repair
