PCB Repair Logs Hyper Olympic

From Aussie Arcade Wiki
Revision as of 09:18, 21 August 2012 by Brad (talk | contribs)
Jump to navigationJump to search

Hyper Olympic

Hyper Olympic
Marquee hyper olympic.jpg
PCB Image Reserved
Pin Out Reserved

Repairer: VectorGlow
Forum Thread: Hyper Olympic PCB Repair

Symptom: Letter ‘N’s filling up the screen (Hyper Olympic)
Cure: Bad 6116 RAM at location 6A on lower board – replaced 6116

Symptom: Letter ‘N’s filling up the screen, and sometimes a few ‘0’s scattered about (Hyper Olympic)
Cure: Bent pin 1 on 42-pin Konami chip at location 3C on lower board, straightened pin

Symptom: No sprites, shimmering jagged vertical lines filling up the whole screen (Hyper Olympic)
Cure: Bad Konami custom at location 16A on lower board replaced

Symptom: Sprites mis-coloured, also sometimes displayed in a block of colour with horizontal lines (Hyper Olympic)
Cure: Bad socket at location 16A on lower board – replaced socket


Back to PCB Repair Index