Difference between revisions of "Arcade Machine Restoration Cabinet"

From Aussie Arcade Wiki
Jump to navigationJump to search
Line 10: Line 10:




Based on KYLE'S LINSTROMES PLANS [http://arcadecontrols.com/arcade_cabinet_plans.shtml#Kyle_PacMan] Which actually use a 1 INCH THICK TOP, so that's why the top is NOT on this initial cut schedule.[/COLOR]
Based on KYLE'S LINSTROMES PLANS ''HERE''[http://arcadecontrols.com/arcade_cabinet_plans.shtml#Kyle_PacMan] Which actually use a 1 INCH THICK TOP, so that's why the top is NOT on this initial cut schedule.[/COLOR]
* * * * IF you want to use a 16mm thick top, then cut the sheet to 1828 x 1220 FIRST * * * * Use the 600 x 1200 offcut piece for the top
* * * * IF you want to use a 16mm thick top, then cut the sheet to 1828 x 1220 FIRST * * * * Use the 600 x 1200 offcut piece for the top



Revision as of 20:45, 8 August 2012

If you have ever wanted to build an arcade cocktail machine just like the Pacman / Ms Pacman cabinets from the past then you are in the right place

These plans started as a mere conversion to Metric for Aussie Arcaders, but led to a complete re-think and re-design so the monitor stays fixed when the cabinet is opened.

Here is the result

UPDATED 01 AUG 2009

Fully Converted set of Metric Pac / Ms Pac Cocktail Cabinet Plans


Based on KYLE'S LINSTROMES PLANS HERE[1] Which actually use a 1 INCH THICK TOP, so that's why the top is NOT on this initial cut schedule.[/COLOR]

  • * * * IF you want to use a 16mm thick top, then cut the sheet to 1828 x 1220 FIRST * * * * Use the 600 x 1200 offcut piece for the top

[COLOR="Blue"]The layout was re-arranged for easier use on a bench saw - So if entirely using a jigsaw, the old layout will work fine for you[/COLOR]

The straight red lines are the cuts

[B]METRIC Cut Schedule[/B]

CLICK TO ENLARGE [URL="http://members.iinet.net.au/~getderrick/pac-cab-whole-sheet-metricAltCut-FINAL.jpg"][IMG]http://members.iinet.net.au/~getderrick/pac-cab-whole-sheet-metricAltCut-FINALsm.jpg[/IMG][/URL]

If using wood grain use this sheet [URL="http://www.aussiearcade.com.au/showpost.php?p=245952&postcount=10"]here[/URL]

[B]Top of cabinet converted to metric[/B]

[URL="http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page01-Top.jpg"][IMG]http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page01-Top-sm.jpg[/IMG][/URL]

[B]CP's and legs on base and Brackets to Metric[/B]

[URL="http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page02-CP&BASE.jpg"][IMG]http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page02-CP&BASE-sm.jpg[/IMG][/URL]


[B]Sides and main base to Metric[/B]

[URL="http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page03-Sides-Base.jpg"][IMG]http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page03-Sides-Base-sm.jpg[/IMG][/URL]

[B][COLOR="Red"]Updated 10-Jan-2009[/COLOR][/B]

[B]Whole Cabinet Numbered[/B]

[URL="http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page04-Whole-Numbered.jpg"][IMG]http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page04-Whole-Numbered-sm.jpg[/IMG][/URL]


[B]Material List[/B]

[URL="http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page05-MaterialsList.jpg"][IMG]http://members.iinet.net.au/~getderrick/MsPacCabPlansRevamped-DB-Page05-MaterialsListSM.jpg[/IMG][/URL]