Difference between revisions of "PCB Repair Logs Lethal Enforcers"

From Aussie Arcade Wiki
Jump to navigationJump to search
(Created page with "==Lethal Enforcers== <p><table class="infobox vevent" style="width:22em;" cellspacing="5"> <caption class="summary" style=""><b>Lethal Enforcers</b></caption> <tr class="> <t...")
 
m
Line 24: Line 24:
<br>
<br>
<br>
<br>
[[File:File:Pcb repair 74ls138 F Chip.jpg|300px|]]
[[File:Pcb repair 74ls138 F Chip.jpg|300px|]]
<br>
<br>
<br>
<br>

Revision as of 06:45, 16 August 2012

Lethal Enforcers

Lethal Enforcers
Marquee lethal enforcers.jpg
PCB Image Reserved
Pin Out Reserved

Repairer: Arcade King
Forum Thread: Crazy Kong (Falcon) PCB Repair

Got this PCB in the freebie shooter cab.

As always first thing I look for on any PCB im about to repair is the F branded Fujitsu logic chips. This brand is the devil! 95% of the problems on pcbs I've repaired over the years are due to these. Doesn't even matter what type of Fujitsu logic either, they are all dying.

Pcb repair 74ls138 F Chip.jpg

Problem: Board constantly resetting, won't boot.
Fix: Dead 74ls138 @ J2 (F chip )

Problem: Games running but has graphics corruption and vertical lines through the graphics.


Pcb repair lethal enforcers 1.jpg

Fix: Very common problem I'm finding on any board with Mask roms. Doing a mask rom test revealed a bad rom @ V8. Put a 42 pin socket in and replaced it with another mask rom I had on a parts LE board. The equivalent EPROM for LE is 27C800 8 meg 16 bit rom.

Problem: Colours messed up.
Fix: Dead outputs on 74ls151's @ J8 and J10. Seen this issue before and the other pcb I looked at was loaded with all F branded 151's . I expect the rest of the 151's will die on this board soon enough.

Problem: Player 1 trigger not working.
Fix: Using the schematics I traced the problem back to a bad 74ls253 @ M3 (F chip)<Bbr>

Anyway game fixed, interesting that this game uses an 8 bit processor.

Pcb repair lethal enforcers 2.jpg



Back to PCB Repair Index