Difference between revisions of "PCB Repair Logs Snow Bros"

From Aussie Arcade Wiki
Jump to navigationJump to search
m
m
 
(6 intermediate revisions by the same user not shown)
Line 7: Line 7:
</tr>
</tr>
<tr class="">
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">PCB Image</th>
<th scope="row" style="text-align:left; white-space: nowrap;">Manufacturer</th>
<td class="" style="">[[PCB_Manufacturers_Toaplan|Toaplan]]</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Year</th>
<td class="" style="">1990</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">[http://wiki.aussiearcade.com.au/index.php/File:Snow_Bros_Repair_4_01.jpg Snow Bros PCB]</th>
<td class="" style="">Reserved</td>
<td class="" style="">Reserved</td>
</tr>
</tr>
<tr class="">
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Pin Out</th>
<th scope="row" style="text-align:left; white-space: nowrap;">Pin Out</th>
<td class="" style="">Reserved</td>
<td class="" style="">[[PCB_Pinouts_Jamma|Jamma]]</td>
</tr>
</tr>
</table></p>
</table></p>
Line 180: Line 188:


As for the resistor pack I have used hundreds of thousands of them in production boards over the years and never had a faulty one until now and will properly never find another one ever again.
As for the resistor pack I have used hundreds of thousands of them in production boards over the years and never had a faulty one until now and will properly never find another one ever again.
<br>
===Board 4===
<br>
'''Repairer:''' [http://www.aussiearcade.com.au/member.php/1983-Womble Womble]<br>
'''Forum Thread:''' [http://www.aussiearcade.com.au/showthread.php/56021-Snow-Bros-Repair-Log Snow Bros PCB Repair]<br>
<br>
I bought this board on eBay ages ago, probably at least a year, and have only just managed to get round to it.
<br>
<br>
[[File:Snow_Bros_Repair_4_01.jpg]]
<br>
<br>
It turned out to be a pretty simple fix, well about 4 simple fixes in all. The seller sold it as dead, saying it used to boot up with a gfx fault until recently when a part fell off the board. The part was not described in the auction but it was included in the sale.
On arrival the board wasn't totally dead, as it did give this on the screen...
<br>
<br>
[[File:Snow_Bros_Repair_4_02.jpg]]
<br>
<br>
...followed by this...
<br>
<br>
[[File:Snow_Bros_Repair_4_03.jpg]]
<br>
<br>
...which repeats for a few cycles then the screen just sticks at this...
<br>
<br>
[[File:Snow_Bros_Repair_4_04.jpg]]
<br>
<br>
... plain background with random blocks.
I was expecting the loose part to be a capacitor of some sort as they are often knocked off boards, it turned out to be a small 5 pin SIP module with all its legs snapped off, it sounds ominous as these are usually custom parts, until you see where it came from...
<br>
<br>
[[File:Snow_Bros_Repair_4_05.jpg]]
<br>
<br>
... it is actually a "support package" for the LA4460 amplifier chip, containing the capacitors and resistors the amp needs to work correctly, the board is actually laid out for the PX4460 support pack, or discrete components so I could have put normal parts in. I also could have attempted to repair the original PX4460 but that is a bit hit and miss. The only place online I could find that sold them was andysarcade.net, and as I know Andy and was due to meet up with him in Melbourne as part of the Game Masters exhibition I asked him to bring one out with him, and this is it...
<br>
<br>
[[File:Snow_Bros_Repair_4_06.jpg]]
<br>
<br>
As its sole purpose is to support the amplifier chip the chances that this falling off the board being the cause of the board completely dying is effectively zero, without this SIP package the amplifier would not work so there would be no sound but it has no bearing on the rest of the circuitry. Still as the amp chip is likely to be unhappy without it (potentially oscillating and getting very hot) I removed the leg stubs from the old one and installed the replacement...
<br>
<br>
[[File:Snow_Bros_Repair_4_07.jpg]]
<br>
<br>
...unsurprisingly enough this had no effect on the fact the board was dead. The legs on this type of component are clamped on and soldered on one side inside the package, this one isn't in perfect condition as you can see but it does the job.
As the board was clearly not booting, although it was probably trying, the first thing was to point the scope at the data lines on the system RAM, ROMs, which are daisy-chained off the 68000 CPU. There are two ROMs and two RAMs, each providing half of the 16Bits of every read/write cycle of the 16 bit CPU. These looked horrible...
<br>
<br>
[[File:Snow_Bros_Repair_4_08.jpg]]
<br>
<br>
... this sawtooth pattern is not what healthy logic transitions should look like and can be a sign of bus contention, ie more than one device trying to talk on the bus at the same time. On the main CPU data bus there will be the CPU itself, some RAM, some ROM and buffers all of which have to be controlled so that when one device has control of the bus, all other devices stay silent for the alloted period of time. Its possible that one of the RAMs, or ROMs had died in a way that it was no longer able to shut up, but as all 16 data pins across the bus where showing this pattern it would take two identical faults on either both RAMs, both ROMs, or a single fault on the CPU itself, all fairly unlikely, the most likely was the output enable system was not working correctly and the /OE pins on the devices were not being controlled. So I pulled both system ROMs from their sockets...
<br>
<br>
[[File:Snow_Bros_Repair_4_09.jpg]]
<br>
<br>
... leaving the RAM and the two SRAMs below and the CPU below that, and powered it up. With no ROMs the system should do nothing at all, and the data bus should be silent, which is what I got, along with a white screen. This doesn't actually prove much but it allows me to check that all the data bus lines looked the same while the board was quiet.
Once the main ROMs were reinstalled on the board I got this - a working board, kinda...
<br>
<br>
[[File:Snow_Bros_Repair_4_10.jpg]]
<br>
<br>
... the main fault was down to oxidised contacts in the ROM sockets and the reseat scratched through this oxide layer and restored the contact. Had this not changed anything the next stage would have been to dump the ROMs to confirm they actually contained the correct data, but as the board booted they clearly did.
The next fault was that the gfx colour was wrong, somewhat muted and very flickery, more evident at some stages of the attract mode cycle than others...
<br>
<br>
[[File:Snow_Bros_Repair_4_11.jpg]]
<br>
<br>
Having worked on Snow Bros boards before I have seen this fault multiple times and it has always been the same problem, a bad 41464 DRAM chip in what I assume is the palette RAM section of the board.
<br>
<br>
[[File:Snow_Bros_Repair_4_12.jpg]]
<br>
<br>
Each chip has 4 output pins and on boards that show this fault you will find one with its outputs stone dead, working along the chips with the scope I started with IC26, all its output pins looked like this...
<br>
<br>
[[File:Snow_Bros_Repair_4_13.jpg]]
<br>
<br>
...healthy transitions between logic high and logic low.
On IC25 and IC23 they were the same, but on IC24...
<br>
<br>
[[File:Snow_Bros_Repair_4_14.jpg]]
<br>
<br>
...they were tied high and barely twitching.
<br>
<br>
[[File:Snow_Bros_Repair_4_15.jpg]]
<br>
<br>
... despite the input pins and control lines functioning normally.
So it came off the board...
<br>
<br>
[[File:Snow_Bros_Repair_4_16.jpg]]
<br>
<br>
... and a known good chip soldered in.
This fixed the washed out colours and most of the flickering...
<br>
<br>
[[File:Snow_Bros_Repair_4_17.jpg]]
<br>
<br>
... but it wasn't 100% yet.
The upper sections of the background in the above photo are corrupted, some of the text was still flikering madly and on the title screen there was a block of grey where there shouldn't be anything.
<br>
<br>
[[File:Snow_Bros_Repair_4_18.jpg]]
<br>
<br>
As the corruption was neat rather than a mess of pixels the most likely cause is a fault with the address bus which from these DRAMs led straight back to the IC18 custom chip, a big fat custom part. This is what you hope not to track back to as they are likely to be only found on boards from this manufacturer and this brief era, however it turned out that this fault was very sensitive to touch. When the chip was pressed the fault would clear, only to return when the pressure was released, classic bad joint symptoms. Looking at the pins under magnification showed this...
<br>
<br>
[[File:Snow_Bros_Repair_4_19.jpg]]
<br>
<br>
... the three pins to the right of pin "1" have hairline cracks detaching them from the board.
<br>
<br>
[[File:Snow_Bros_Repair_4_20.png]]
<br>
<br>
With a dab of flux and some fine solder I re-flowed these joints and restored the connections, close inspection of the rest of the IC showed no other bad joints, and the board was fixed.
<br>
<br>
[[File:Snow_Bros_Repair_4_21.jpg]]
<br>
<br>
[[File:Snow_Bros_Repair_4_22.jpg]]
<br>
<br>
Yay!


<br>[[PCB_Repair_Index|Back to PCB Repair Index]]
<br>[[PCB_Repair_Index|Back to PCB Repair Index]]

Latest revision as of 08:13, 7 February 2013

Snow Bros

Snow Bros
Marquee snow bros.png
Manufacturer Toaplan
Year 1990
Snow Bros PCB Reserved
Pin Out Jamma


Board 1


Repairer: Womble
Forum Thread: Snow Bros PCB Repair

Picked up a couple of faulty Snow Bros boards a while ago.

One had missing chips so I focused on the complete one initially, the seller had sold them both as having gfx issues and stated that neither had been hacked around, not quite sure what he calls the fact of logic chip hacked off the second board, old age probably.

Anyway - the fault on the 1st board was that the colours were messed up and the screen was very very flickery.

Pcb repair snow bros 1.jpg

Hard to catch "flicker on photos" but you can see the raster scanning down the face changing the colour from blue to pink, thats flicker!

Pcb repair snow bros 2.jpg

The game looks ok but the colours are washed out and that damn flickering....

Pcb repair snow bros 3.jpg

I went over the board looking for damage and found nothing, despite the dust it is a very nice board. The game was running fine and the sounds were good so I didn't bother to dump the 4 ROMs, just reseated them.

Had a poke around the board with the scope and found that the majority of the chips had what looked like an unstable logic 1 state - the high logic level was pulsing in time with the screen flickering, by looking away from the screens but watching the monitor and the scope screen out of the corner of my eyeI could see that the images were exactly in time with each other.

At that point I thought it would be an easy fix, all I had to do was find the chip with normal inputs and bouncy outputs and that should be the problem - nice idea except I couldn’t find a chip like that. I was somewhat concerned by the NEC D41101C chip by the custom IC, I struggled to find out what it was. It looked rather like a SRAM chip and if I assumed the pinout was the fairly standard SRAM pinout then it did have a few outputs bouncing around, however it also had an "address pin" that looked exactly like a clock signal which kinda buggered my theory. Turns out it is something to do with the video, a "910*8 NTSC line buffer", either way when I had the correct pinout it was clear that its outputs were ok, it was the input signals that were bouncy and that clock signal was indeed a clock signal.

I really dislike having a board that is doing bad things when there is a fat custom chip present, this one is a 120pin surface mount chip that I couldn’t find any info on. Thankfully customs are pretty robust so I left it alone and hoped it was not the culprit. Thats about all you can do with customs, leave them alone and look for other issues, if you find none then you end up back at the custom again.

Poking around the two Sharp LH5126-12 chips at 6N and 7N I found what looked like a fault but turns out to be totally normal. Address pins A8, A9 and A10, along with data pin D7 were all tied low. This is very unusual as it effectively removes a large lump of the RAM space and partially buggers the output. The other RAMs at H6 and H7 are used normally.

Sticking with the RAM I hit the 4 DRAM chips at A2, B2, A4, B4 - the 1st arcade board I have seen with DRAM instead of SRAM. It needs more support circuitry but the capacity is a lot higher, probably why DRAM has since taken over as the standard RAM chippery.

At this point I made a stupid mistake, arcade boards usually have the chips lined up so that when the JAMMA connector is on the left hand edge (how my bench is set up) the chip markings are the right way up, this board is the reverse. I read the chips as being 4164 chips - very very common chips from the early to mid 80s, so I pulled out the pinouts for them and went round the chip. It didn’t make much sense, pin 1 on 4164s are not used, yet pin one on these chips was happily active. For some reason this didn’t ring alarm bells, and as I have a nasty habit of counting up from 1 to find a pin on side A and down from the 5V pin to find a pin on side B I also did not spot that 4164s have 16 pins and these buggers had 18. 4164s are 1 bit wide chips, each address location is only 1 bit, so they are usually used in banks of 8, each chip contributing 1 bit to the byte being read.

These chips were actually 41464s a very different animal, an easy mistake when reading upside down at an angle I guess. These chips are more modern than the 4164s, slightly more inline with the vintage of the board actually. They are 4 bit wide chips, ie 4 data output pins rather than the single one on a 4164.

Once I actually applied the correct pinout to the chip I was trying to troubleshoot on the scope it made a whole lot more sense. Hitting the 4 data lines on all four chips I found one chip that had very unhappy looking outputs. Because of the flickering it was hard to get a good zoomed in view of the data lines, on the good chips with the best scope settings I could find, the data line is frenetically busy,

Pcb repair snow bros 4.jpg

... on the suspect chip it was very quiet, a lot of bumping as per all the other chips, but not much activity.

Pcb repair snow bros 5.jpg

So I desoldered that chip and powered the board back up without it.

Pcb repair snow bros 6.jpg

Nothing changed, the bouncing was still there, the colours were not great and the screen was flickery, this was good news. If the chip was doing something then the board should behave differently when it was physically removed. This suggested that the crap colours and flickering are what the board does when one RAM chip is missing, either physically missing, or still there but knackered.

Found a guy on eBay in the US who happened to be selling 4 of these chips at $2 each, so I bought the lot, soldered in a socket and waited for the parcel. It arrived today and when I dropped in a new chip the problem....

.... vanished!

Pcb repair snow bros 7.jpg

Pcb repair snow bros 8.jpg

Pcb repair snow bros 9.jpg

Pcb repair snow bros 10.jpg

The bouncing logic issues have gone away too, I can only guess the board strobes through each chip in turn and the lack of a working chip at that location causes major instability, am surprised that it affects most of the board though, it can't be a short in the chip from the CAS or RAS signal as the instability was there when the chip wasn't

Just got to fix the second one now, handy that it is almost the same fault

Board 2


Repairer: Womble
Forum Thread: Snow Bros PCB Repair

Thanks, am looking fwd to a good blast on it - my wife loves games like this too.

Decided to have a go at the second board and it wasn't quite the same issue, will post it as a reply to this thread as there is a limit to the number of photos you can have in one post.

So - the second board also had "gfx issues", when it 1st arrived and I plugged in it did this - the game ran but everything was red and flickering like mad.

Pcb repair snow bros 11.jpg

The RGB lines connect back to 3 resistor networks strung across two 74HC273s, at 9N and 9M, one of which had been removed rather violently by a previous owner so no surprise the colours were borked. Despite the way it looks all the plate-through holes were thankfully still connected to their tracks. The chips ground pin was still in its hole and had been cut off the chip when they gave up on it. This board is a pain to work on, the copper ground and 5V plane must be massive compared to my other SB board, its almost impossible to get things off this one.

Pcb repair snow bros 12.jpg

The existing HC273 tested as OK but I fitted a matching pair of new chips and brought a bit more life back to the board, a nice sepia tone to it all, plus flickering.

Pcb repair snow bros 16.jpg

Hitting the output pins on the 41464 chips as per the 1st board I found the chip at 4A had all 4 outputs stuck wobbling around high, so whipped it out, fitted a socket and a new chip.

Pcb repair snow bros 13.jpg

I was expecting the board to fire up perfectly, except it didn't. The flickering was gone but everything was still sepia, a distinct lack of blue!

I put the scope on the blue jamma pin and got nothing, the red and green were happily buzzing away. The blue pad on the JAMMA connector connects straight to the far end pin on resistor network RA5 at 10N which connects to the HC273s. On closer inspection it looks like this has had a bit of a whack. There was a small crack in the black housing by the +5V bus pin, which when poked with a screwdriver, flaked off.

I desoldered the whole thing and the bus pin (that connects to 5V) fell off. I went over my scrap boards and could not find another one that was the right number of pins and the right rating, nor could I actually confirm anywhere that this is a normal resistor network - am not sure it is based on how it is connected in this circuit, so I got my mini files out and attempted to mend it. I filed just enough of the black coating to expose some of the metal pad on the internal structure. Refitted the component to the board minus the bus pin, then took an ofcut from an LED leg and bent it through the PCB hole so it lined up flush with the exposed inner metal on RA5. Soldered the old LED leg to the PCB then soldered the end to the broken edge of RA5.

Pcb repair snow bros 14.jpg

A quick trim with the wire cutters and powered her back up.

We have blue!!

In fact we have a perfect Snow Bros board

Pcb repair snow bros 15.jpg

I put a drop of PCB lacquer over the repaired RA5 to prevent it from oxidising as there was only a tiny bit of metal to work with originally, I won't be lucky again

Board 3


Repairer: truxpin
Forum Thread: Snow Bros PCB Repair

Brought this board off Stu along with a few other faulty ones a while back and finally got around to having a look at it.

At start up it plays the start up tune and shows a bunch of graphics crap on the screen. A scope check on the 68000 main processor shows good reset and clock and a very small amount of address and data bus activity. The main issue looked to be something jamming up the data bus as some of the data pins seemed unable to fully pull up to VCC and one pin to unable to pull down VDD fully.

Now to start removing and testing things attached to the data bus.

Test program roms ic5 and ic6 both good Ram ic7 and ic8 both good 74ls245 ic16 good

Something strange going on after measuring resistances of the data bus to 5V and Gnd.

I found a 150 ohm leak to gnd on bit D12 of the data bus so now to start isolating every thing else connected to bit D12. Not many items the 68000 ic4 the input custom ic38 and a 10K resistor pack RA1 things were looking ominous at this point.

Fully expecting it to be the unreplaceable custom ic38. I unsoldered and isolated the suspect pin pin37. This proved ic38 not guilty to my relief! Next pin57 of the 68000 also not guilty.

Crap not much left, the resistor pack or a short in the pcb itself. Removed the resistor pack RA1 not expecting this to be faulty bingo fault gone!

Fit a new resistor pack + resolder every thing I had unsoldered plugged the board in cross fingers power up and all good as the board sprang to life another classic saved from the big scrap heap in the sky.

Great game just a pity that I suck a playing it think I need a lot more practice.

As for the resistor pack I have used hundreds of thousands of them in production boards over the years and never had a faulty one until now and will properly never find another one ever again.

Board 4


Repairer: Womble
Forum Thread: Snow Bros PCB Repair

I bought this board on eBay ages ago, probably at least a year, and have only just managed to get round to it.

Snow Bros Repair 4 01.jpg

It turned out to be a pretty simple fix, well about 4 simple fixes in all. The seller sold it as dead, saying it used to boot up with a gfx fault until recently when a part fell off the board. The part was not described in the auction but it was included in the sale.

On arrival the board wasn't totally dead, as it did give this on the screen...

Snow Bros Repair 4 02.jpg

...followed by this...

Snow Bros Repair 4 03.jpg

...which repeats for a few cycles then the screen just sticks at this...

Snow Bros Repair 4 04.jpg

... plain background with random blocks.

I was expecting the loose part to be a capacitor of some sort as they are often knocked off boards, it turned out to be a small 5 pin SIP module with all its legs snapped off, it sounds ominous as these are usually custom parts, until you see where it came from...

Snow Bros Repair 4 05.jpg

... it is actually a "support package" for the LA4460 amplifier chip, containing the capacitors and resistors the amp needs to work correctly, the board is actually laid out for the PX4460 support pack, or discrete components so I could have put normal parts in. I also could have attempted to repair the original PX4460 but that is a bit hit and miss. The only place online I could find that sold them was andysarcade.net, and as I know Andy and was due to meet up with him in Melbourne as part of the Game Masters exhibition I asked him to bring one out with him, and this is it...

Snow Bros Repair 4 06.jpg

As its sole purpose is to support the amplifier chip the chances that this falling off the board being the cause of the board completely dying is effectively zero, without this SIP package the amplifier would not work so there would be no sound but it has no bearing on the rest of the circuitry. Still as the amp chip is likely to be unhappy without it (potentially oscillating and getting very hot) I removed the leg stubs from the old one and installed the replacement...

Snow Bros Repair 4 07.jpg

...unsurprisingly enough this had no effect on the fact the board was dead. The legs on this type of component are clamped on and soldered on one side inside the package, this one isn't in perfect condition as you can see but it does the job.

As the board was clearly not booting, although it was probably trying, the first thing was to point the scope at the data lines on the system RAM, ROMs, which are daisy-chained off the 68000 CPU. There are two ROMs and two RAMs, each providing half of the 16Bits of every read/write cycle of the 16 bit CPU. These looked horrible...

Snow Bros Repair 4 08.jpg

... this sawtooth pattern is not what healthy logic transitions should look like and can be a sign of bus contention, ie more than one device trying to talk on the bus at the same time. On the main CPU data bus there will be the CPU itself, some RAM, some ROM and buffers all of which have to be controlled so that when one device has control of the bus, all other devices stay silent for the alloted period of time. Its possible that one of the RAMs, or ROMs had died in a way that it was no longer able to shut up, but as all 16 data pins across the bus where showing this pattern it would take two identical faults on either both RAMs, both ROMs, or a single fault on the CPU itself, all fairly unlikely, the most likely was the output enable system was not working correctly and the /OE pins on the devices were not being controlled. So I pulled both system ROMs from their sockets...

Snow Bros Repair 4 09.jpg

... leaving the RAM and the two SRAMs below and the CPU below that, and powered it up. With no ROMs the system should do nothing at all, and the data bus should be silent, which is what I got, along with a white screen. This doesn't actually prove much but it allows me to check that all the data bus lines looked the same while the board was quiet.

Once the main ROMs were reinstalled on the board I got this - a working board, kinda...

Snow Bros Repair 4 10.jpg

... the main fault was down to oxidised contacts in the ROM sockets and the reseat scratched through this oxide layer and restored the contact. Had this not changed anything the next stage would have been to dump the ROMs to confirm they actually contained the correct data, but as the board booted they clearly did.

The next fault was that the gfx colour was wrong, somewhat muted and very flickery, more evident at some stages of the attract mode cycle than others...

Snow Bros Repair 4 11.jpg

Having worked on Snow Bros boards before I have seen this fault multiple times and it has always been the same problem, a bad 41464 DRAM chip in what I assume is the palette RAM section of the board.

Snow Bros Repair 4 12.jpg

Each chip has 4 output pins and on boards that show this fault you will find one with its outputs stone dead, working along the chips with the scope I started with IC26, all its output pins looked like this...

Snow Bros Repair 4 13.jpg

...healthy transitions between logic high and logic low.

On IC25 and IC23 they were the same, but on IC24...

Snow Bros Repair 4 14.jpg

...they were tied high and barely twitching.

Snow Bros Repair 4 15.jpg

... despite the input pins and control lines functioning normally.

So it came off the board...

Snow Bros Repair 4 16.jpg

... and a known good chip soldered in.

This fixed the washed out colours and most of the flickering...

Snow Bros Repair 4 17.jpg

... but it wasn't 100% yet.

The upper sections of the background in the above photo are corrupted, some of the text was still flikering madly and on the title screen there was a block of grey where there shouldn't be anything.

Snow Bros Repair 4 18.jpg

As the corruption was neat rather than a mess of pixels the most likely cause is a fault with the address bus which from these DRAMs led straight back to the IC18 custom chip, a big fat custom part. This is what you hope not to track back to as they are likely to be only found on boards from this manufacturer and this brief era, however it turned out that this fault was very sensitive to touch. When the chip was pressed the fault would clear, only to return when the pressure was released, classic bad joint symptoms. Looking at the pins under magnification showed this...

Snow Bros Repair 4 19.jpg

... the three pins to the right of pin "1" have hairline cracks detaching them from the board.

Snow Bros Repair 4 20.png

With a dab of flux and some fine solder I re-flowed these joints and restored the connections, close inspection of the rest of the IC showed no other bad joints, and the board was fixed.

Snow Bros Repair 4 21.jpg

Snow Bros Repair 4 22.jpg

Yay!


Back to PCB Repair Index