Difference between revisions of "PCB Repair Logs Turbo Force"

From Aussie Arcade Wiki
Jump to navigationJump to search
(Created page with "==Turbo Force== <p><table class="infobox vevent" style="width:22em;" cellspacing="5"> <caption class="summary" style=""><b>Turbo Force</b></caption> <tr class="> <td colspan="...")
 
m
 
Line 4: Line 4:
<tr class=">
<tr class=">
<td colspan="2" class="" style="text-align:center;">[[Image:marquee_turbo_force.jpg|200px]]</td>
<td colspan="2" class="" style="text-align:center;">[[Image:marquee_turbo_force.jpg|200px]]</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Manufacturer</th>
<td class="" style="">[[PCB_Manufacturers_Video_System_Co_Ltd|Video System Co Ltd]]</td>
</tr>
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Year</th>
<td class="" style="">1989</td>
</tr>
</tr>
<tr class="">
<tr class="">
Line 11: Line 19:
<tr class="">
<tr class="">
<th scope="row" style="text-align:left; white-space: nowrap;">Pin Out</th>
<th scope="row" style="text-align:left; white-space: nowrap;">Pin Out</th>
<td class="" style="">Reserved</td>
<td class="" style="">[[PCB_Pinouts_Jamma|Jamma]]</td>
</tr>
</tr>



Latest revision as of 08:39, 7 February 2013

Turbo Force

Turbo Force
Marquee turbo force.jpg
Manufacturer Video System Co Ltd
Year 1989
PCB Image Turbo Force PCB
Pin Out Jamma

Repairer: Elgen
Forum Thread: Turbo Force PCB Repair

Now I did do a mock-up of this somewhat easy repair with just some hook-up wires a few months ago, but always had a feeling that it could be done nicer. And now it just bugged me so much, that I had to do it...and why not make a log for others to see, I thought };-D

Got this original Turbo Force as untested in a larger batch of untested boards.

Pcb repair turbo force 1.jpg

It wouldn't do anything just black screen and no sound. This construction immediately caught my eye; the sub board had a loose wire hanging from it.

Pcb repair turbo force 2.jpg

And when I pulled the sub board from it's socket, I saw that the thin bit were broken off of 2 of the pins

Pcb repair turbo force 3.jpg

and one of the pieces were still stuck i the socket.

Pcb repair turbo force 4.jpg

I managed to remove that with 2 needles and alot of patience.

Now my first plan was to saw a bit of the 2 broken pins and pacthing them with 2 pins of header strip by soldering them on.

Pcb repair turbo force 5.jpg

But I must have been too eager when sawing and wiggled the pins too much, cause they broke off at the end soldered to the sub board, also taking the pin beside them in the fall with them };-( So that plan was out. I then remembered that I had a strip of these from a batch of scraped components I got from a shop once

Pcb repair turbo force 6.jpg

I straightened 3 of them out and pulled them out of the socket. Cleaned the holes on the sub board, soldered them in, and cut them down to the right lenght.

Pcb repair turbo force 7.jpg

Now I had to deal with the loose wire. Putting the sub board back in place, the lenght of the wire gave my an obvious radius on the board to investigate. I quickly found a pin on a socketed IC with a blob of solder on it

Pcb repair turbo force 8.jpg

Tried connecting the board just pressing the wire against this pin, and viola:

File:Pcb repair turbo force 9.jpg

Now I soldered the wire on

Pcb repair turbo force 10.jpg

Case closed.

Actually it's a great vert shmup only using 1 button; smart bombs can be picked up, but are fired immediately upon pick up. The board also have a molex for a 3th controller so you could play 3 players simultaneously; I'd like to have a try at that some day };-P


Back to PCB Repair Index