PCB Repair Logs Vulcan Venture
From Aussie Arcade Wiki
Jump to navigationJump to searchVulcan Venture
 |
|
| Manufacturer | Konami |
|---|---|
| Year | 1988 |
| PCB Image | Reserved |
| Pin Out | Jamma |
Repairer: VectorGlow
Forum Thread: Vulcan Venture PCB Repair
Symptom: Boardset won’t boot, just resetting
Cure: No outputs on the LS32 at location 1K on the top board – replaced IC
Symptom: Boardset constantly resetting
Cure: No input on address line four on the main program ROMs – bad LS244 at location 6L on the top board – replaced IC
Symptom: Board boots and there’s video sync, but approx once every 13 seconds it reboots
Diagnosis: Seemed like it was running the diagnostics but something preventing video output and obviously then failing some tests
Cure: Bad LS244 at location A4 on the board board – replaced IC
Symptom: Vertical grey lines through many sprites
Cure: Bad LS244 at location E23 on the bottom board – replaced IC
