PCB Repair Logs Vulcan Venture

From Aussie Arcade Wiki
Revision as of 10:28, 7 February 2013 by Brad (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Vulcan Venture

Vulcan Venture
Marquee vulcan venture.jpg
Manufacturer Konami
Year 1988
PCB Image Reserved
Pin Out Jamma

Repairer: VectorGlow
Forum Thread: Vulcan Venture PCB Repair

Symptom: Boardset won’t boot, just resetting
Cure: No outputs on the LS32 at location 1K on the top board – replaced IC

Symptom: Boardset constantly resetting
Cure: No input on address line four on the main program ROMs – bad LS244 at location 6L on the top board – replaced IC

Symptom: Board boots and there’s video sync, but approx once every 13 seconds it reboots
Diagnosis: Seemed like it was running the diagnostics but something preventing video output and obviously then failing some tests
Cure: Bad LS244 at location A4 on the board board – replaced IC

Symptom: Vertical grey lines through many sprites
Cure: Bad LS244 at location E23 on the bottom board – replaced IC


Back to PCB Repair Index

Retrieved from "https://wiki.aussiearcade.com/index.php?title=PCB_Repair_Logs_Vulcan_Venture&oldid=2757"